Skip to content

Smart card authentication

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

GitLab supports authentication using smart cards.

Existing password authentication

By default, existing users can continue to sign in with a username and password when smart card authentication is enabled.

To force existing users to use only smart card authentication, disable username and password authentication.

Authentication methods

GitLab supports two authentication methods:

  • X.509 certificates with local databases.
  • LDAP servers.

Authentication against a local database with X.509 certificates

DETAILS: Status: Experiment

Smart cards with X.509 certificates can be used to authenticate with GitLab.

To use a smart card with an X.509 certificate to authenticate against a local database with GitLab, CN and emailAddress must be defined in the certificate. For example:

Certificate:
    Data:
        Version: 1 (0x0)
        Serial Number: 12856475246677808609 (0xb26b601ecdd555e1)
    Signature Algorithm: sha256WithRSAEncryption
        Issuer: O=Random Corp Ltd, CN=Random Corp
        Validity
            Not Before: Oct 30 12:00:00 2018 GMT
            Not After : Oct 30 12:00:00 2019 GMT
        Subject: CN=Gitlab User, [email protected]

Authentication against a local database with X.509 certificates and SAN extension

DETAILS: Status: Experiment

Smart cards with X.509 certificates using SAN extensions can be used to authenticate with GitLab.

To use a smart card with an X.509 certificate to authenticate against a local database with GitLab:

  • At least one of the subjectAltName (SAN) extensions must define the user identity (email) within the GitLab instance (URI).
  • The URI must match Gitlab.config.host.gitlab.
  • If your certificate contains only one SAN email entry, you don't need to add or modify it to match the email with the URI.

For example:

Certificate:
    Data:
        Version: 1 (0x0)
        Serial Number: 12856475246677808609 (0xb26b601ecdd555e1)
    Signature Algorithm: sha256WithRSAEncryption
        Issuer: O=Random Corp Ltd, CN=Random Corp
        Validity
            Not Before: Oct 30 12:00:00 2018 GMT
            Not After : Oct 30 12:00:00 2019 GMT
        ...
        X509v3 extensions:
            X509v3 Key Usage:
                Key Encipherment, Data Encipherment
            X509v3 Extended Key Usage:
                TLS Web Server Authentication
            X509v3 Subject Alternative Name:
                email:[email protected], URI:http://gitlab.example.com/

Authentication against an LDAP server

DETAILS: Status: Experiment

GitLab implements a standard way of certificate matching following RFC4523. It uses the certificateExactMatch certificate matching rule against the userCertificate attribute. As a prerequisite, you must use an LDAP server that:

  • Supports the certificateExactMatch matching rule.
  • Has the certificate stored in the userCertificate attribute.

Authentication against an Active Directory LDAP server

Active Directory does not support the certificateExactMatch rule or the userCertificate attribute. Most tools for certificate-based authentication such as smart cards use the altSecurityIdentities attribute, which can contain multiple certificates for each user. The data in the field must match one of the formats Microsoft recommends.

Use the following attributes to customize the field GitLab checks and the format for certificate data:

  • smartcard_ad_cert_field - specify the name of the field to search. This can be any attribute on a user object.
  • smartcard_ad_cert_format - specify the format of the information gathered from the certificate. This format must be one of the following values. The most common is issuer_and_serial_number to match the behavior of non-Active Directory LDAP servers.
smartcard_ad_cert_format Example data
principal_name X509:<PN>[email protected]
rfc822_name X509:<RFC822>[email protected]
issuer_and_subject X509:<I>DC=com,DC=example,CN=EXAMPLE-DC-CA<S>DC=com,DC=example,OU=UserAccounts,CN=cynthia
subject X509:<S>DC=com,DC=example,OU=UserAccounts,CN=dennis
issuer_and_serial_number X509:<I>DC=com,DC=example,CN=CONTOSO-DC-CA<SR>1181914561

For issuer_and_serial_number, the <SR> portion is in reverse-byte-order, with the least-significant byte first. For more information, see how to map a user to a certificate using the altSecurityIdentities attribute.

NOTE: If no smartcard_ad_cert_format is specified, but an LDAP server is configured with active_directory: true and smart cards enabled, GitLab defaults to the behavior of 16.8 and earlier, and uses certificateExactMatch on the userCertificate attribute.

Authentication against Entra ID Domain Services

Microsoft Entra ID, formerly known as Azure Active Directory, provides a cloud-based directory for companies and organizations. Entra Domain Services provides a secure read-only LDAP interface to the directory, but only exposes a limited subset of the fields Entra ID has.

Entra ID uses the CertificateUserIds field to manage client certificates for users, but this field is not exposed in LDAP / Entra ID Domain Services. With a cloud-only setup, it is not possible for GitLab to authenticate users' smart cards using LDAP.

In a hybrid on-premise and cloud environment, entities are synced between the on-premise Active Directory controller and the cloud Entra ID using Entra Connect. If you are syncing your altSecurityIdentities attribute to certificateUserIds in Entra ID using Entra ID Connect, you can expose this data in LDAP / Entra ID Domain Services so it can be authenticated by GitLab:

  1. Add a rule to Entra ID Connect to sync the altSecurityIdentities to an additional attribute in Entra ID.
  2. Enable that extra attribute as an extension attribute in Entra ID Domain Services.
  3. Configure the smartcard_ad_cert_field field in GitLab to use this extension attribute.

Configure GitLab for smart card authentication

For Linux package installations:

  1. Edit /etc/gitlab/gitlab.rb:

    # Allow smart card authentication
gitlab_rails['smartcard_enabled'] = true

# Path to a file containing a CA certificate
gitlab_rails['smartcard_ca_file'] = "/etc/ssl/certs/CA.pem"

# Host and port where the client side certificate is requested by the
# webserver (NGINX/Apache)
gitlab_rails['smartcard_client_certificate_required_host'] = "smartcard.example.com"
gitlab_rails['smartcard_client_certificate_required_port'] = 3444

    NOTE: Assign a value to at least one of the following variables: gitlab_rails['smartcard_client_certificate_required_host'] or gitlab_rails['smartcard_client_certificate_required_port'].

  2. Save the file and reconfigure GitLab for the changes to take effect.

For self-compiled installations:

  1. Configure NGINX to request a client side certificate

    In NGINX configuration, an additional server context must be defined with the same configuration except:

    • The additional NGINX server context must be configured to run on a different port:

      listen *:3444 ssl;

    • It can also be configured to run on a different hostname:

      listen smartcard.example.com:443 ssl;

    • The additional NGINX server context must be configured to require the client side certificate:

      ssl_verify_depth 2;
ssl_client_certificate /etc/ssl/certs/CA.pem;
ssl_verify_client on;

    • The additional NGINX server context must be configured to forward the client side certificate:

      proxy_set_header    X-SSL-Client-Certificate    $ssl_client_escaped_cert;

    For example, the following is an example server context in an NGINX configuration file (such as in /etc/nginx/sites-available/gitlab-ssl):

    server {
    listen smartcard.example.com:3443 ssl;

    # certificate for configuring SSL
    ssl_certificate /path/to/example.com.crt;
    ssl_certificate_key /path/to/example.com.key;

    ssl_verify_depth 2;
    # CA certificate for client side certificate verification
    ssl_client_certificate /etc/ssl/certs/CA.pem;
    ssl_verify_client on;

    location / {
        proxy_set_header    Host                        $http_host;
        proxy_set_header    X-Real-IP                   $remote_addr;
        proxy_set_header    X-Forwarded-For             $proxy_add_x_forwarded_for;
        proxy_set_header    X-Forwarded-Proto           $scheme;
        proxy_set_header    Upgrade                     $http_upgrade;
        proxy_set_header    Connection                  $connection_upgrade;

        proxy_set_header    X-SSL-Client-Certificate    $ssl_client_escaped_cert;

        proxy_read_timeout 300;

        proxy_pass http://gitlab-workhorse;
    }
}

  2. Edit config/gitlab.yml:

    ## Smart card authentication settings
smartcard:
  # Allow smart card authentication
  enabled: true

  # Path to a file containing a CA certificate
  ca_file: '/etc/ssl/certs/CA.pem'

  # Host and port where the client side certificate is requested by the
  # webserver (NGINX/Apache)
  client_certificate_required_host: smartcard.example.com
  client_certificate_required_port: 3443

    NOTE: Assign a value to at least one of the following variables: client_certificate_required_host or client_certificate_required_port.

  3. Save the file and restart GitLab for the changes to take effect.

Additional steps when using SAN extensions

For Linux package installations:

  1. Add to /etc/gitlab/gitlab.rb:

    gitlab_rails['smartcard_san_extensions'] = true

  2. Save the file and reconfigure GitLab for the changes to take effect.

For self-compiled installations:

  1. Add the san_extensions line to config/gitlab.yml within the smart card section:

    smartcard:
   enabled: true
   ca_file: '/etc/ssl/certs/CA.pem'
   client_certificate_required_port: 3444

   # Enable the use of SAN extensions to match users with certificates
   san_extensions: true

  2. Save the file and restart GitLab for the changes to take effect.

Additional steps when authenticating against an LDAP server

For Linux package installations:

  1. Edit /etc/gitlab/gitlab.rb:

    gitlab_rails['ldap_servers'] = YAML.load <<-EOS
main:
  # snip...
  # Enable smart card authentication against the LDAP server. Valid values
  # are "false", "optional", and "required".
  smartcard_auth: optional

  # If your LDAP server is Active Directory, you can configure these two fields.
  # Specify which field contains certificate information, 'altSecurityIdentities' by default
  smartcard_ad_cert_field: altSecurityIdentities

  # Specify format of certificate information. Valid values are:
  # principal_name, rfc822_name, issuer_and_subject, subject, issuer_and_serial_number
  smartcard_ad_cert_format: issuer_and_serial_number
EOS

  2. Save the file and reconfigure GitLab for the changes to take effect.

For self-compiled installations:

  1. Edit config/gitlab.yml:

    production:
  ldap:
    servers:
      main:
        # snip...
        # Enable smart card authentication against the LDAP server. Valid values
        # are "false", "optional", and "required".
        smartcard_auth: optional

        # If your LDAP server is Active Directory, you can configure these two fields.
        # Specify which field contains certificate information, 'altSecurityIdentities' by default
        smartcard_ad_cert_field: altSecurityIdentities

        # Specify format of certificate information. Valid values are:
        # principal_name, rfc822_name, issuer_and_subject, subject, issuer_and_serial_number
        smartcard_ad_cert_format: issuer_and_serial_number

  2. Save the file and restart GitLab for the changes to take effect.

Require browser session with smart card sign-in for Git access

For Linux package installations:

  1. Edit /etc/gitlab/gitlab.rb:

    gitlab_rails['smartcard_required_for_git_access'] = true

  2. Save the file and reconfigure GitLab for the changes to take effect.

For self-compiled installations:

  1. Edit config/gitlab.yml:

    ## Smart card authentication settings
smartcard:
  # snip...
  # Browser session with smart card sign-in is required for Git access
  required_for_git_access: true

  2. Save the file and restart GitLab for the changes to take effect.

Passwords for users created via smart card authentication

The Generated passwords for users created through integrated authentication guide provides an overview of how GitLab generates and sets passwords for users created via smart card authentication.