Skip to content

Migrating from the DAST proxy-based analyzer to DAST version 5

DAST version 5 replaces the proxy-based analyzer with a browser-based analyzer. This document serves as a guide to migrate from the proxy-based analyzer to DAST version 5.

Follow this migration guide if all the following conditions apply:

  1. You use GitLab DAST to run a DAST scan in a CI/CD pipeline.
  2. The DAST CI/CD job is configured by including either of the DAST templates DAST.gitlab-ci.yml or DAST.latest.gitlab-ci.yml.
  3. The CI/CD variable DAST_VERSION is not set or is set to 4 or less.
  4. The CI/CD variable DAST_BROWSER_SCAN is not set or is set to false.

Migrate to DAST version 5 by reading the following sections and making the recommended changes.

DAST analyzer versions

DAST comes in two major versions: 4 and 5. Effective from GitLab 17.0 the DAST templates DAST.gitlab-ci.yml and DAST.latest.gitlab-ci.yml use DAST version 5 by default. You can continue using DAST version 4, but you should do so only as an interim measure while migrating to DAST version 5. For details, see Continuing to use the proxy-based analyzer.

Each DAST major version uses different analyzers by default:

  • DAST version 4 uses the proxy-based analyzer.
  • DAST version 5 uses the browser-based analyzer.

DAST version 5 uses a set of new CI/CD variables. Aliases have been created for the DAST version 4 variables' names.

Changes to make:

  • To test your DAST scan using DAST version 5 in GitLab 16.11 and earlier, set the CI/CD variable DAST_VERSION to 5.

Continuing to use the proxy-based analyzer

You can use the proxy-based DAST analyzer until GitLab 18.0. Bugs and vulnerabilities in this legacy analyzer will not be fixed.

Changes to make:

  • To continue using the proxy-based analyzer, set the CI/CD variable DAST_VERSION variable to 4.

Artifacts

GitLab 17.0 automatically publishes artifacts produced by DAST version 5 to the DAST CI job.

Changes to make:

  • Remove artifacts from the CI job definition if you have overridden it to expose the file log, crawl graph, or authentication report.
  • CI/CD variables DAST_BROWSER_FILE_LOG_PATH and DAST_FILE_LOG_PATH are no longer required.

Authentication

The proxy-based analyzer and DAST version 5 both use the browser-based analyzer to authenticate. Upgrading to DAST version 5 does not change how authentication works.

Changes to make:

  • Rename authentication CI/CD variables, see variables with the DAST_AUTH prefix.
  • If not already done, exclude the logout URL from the scan using DAST_SCOPE_EXCLUDE_URLS.

Crawling

DAST version 5 crawls the target application in a browser to provide better crawl coverage. This may require more resources to run than an equivalent proxy-based analyzer crawl.

Changes to make:

  • Use DAST_TARGET_URL instead of DAST_WEBSITE.
  • Use DAST_CRAWL_TIMEOUT instead of DAST_SPIDER_MINS.
  • CI/CD variables DAST_USE_AJAX_SPIDER, DAST_SPIDER_START_AT_HOST, DAST_ZAP_CLI_OPTIONS and DAST_ZAP_LOG_CONFIGURATION are no longer supported.
  • Configure DAST_PAGE_MAX_RESPONSE_SIZE_MB if DAST should process response bodies larger than 10 MB.
  • Consider providing more CPU resources to the GitLab Runner executing the DAST job.

Scope

DAST version 5 provides more control over scope compared to the proxy-based analyzer.

Changes to make:

  • Use DAST_SCOPE_ALLOW_HOSTS instead of DAST_ALLOWED_HOSTS.
  • The domain of DAST_TARGET_URL is automatically added to DAST_SCOPE_ALLOW_HOSTS, consider adding domains for the target application API and asset endpoints.
  • Remove domains from the scan by adding them to DAST_SCOPE_EXCLUDE_HOSTS (except during authentication).

Vulnerability checks

Changes required

DAST version 5 uses vulnerability definitions built by GitLab, these do not map directly to proxy-based analyzer definitions.

Changes to make:

  • Use DAST_CHECKS_TO_RUN instead of DAST_ONLY_INCLUDE_RULES. Change the IDs used to GitLab DAST vulnerability check IDs.
  • Use DAST_CHECKS_TO_EXCLUDE instead of DAST_EXCLUDE_RULES. Change the IDs used to GitLab DAST vulnerability check IDs.
  • See vulnerability check documentation for descriptions and IDs of GitLab DAST vulnerability checks.
  • CI/CD variables DAST_AGGREGATE_VULNERABILITIES and DAST_MAX_URLS_PER_VULNERABILITY are no longer supported.

Why migrating produces different vulnerabilities

Proxy-based scans and browser-based DAST version 5 scans do not produce the same results because they use a different set of vulnerability checks.

DAST version 5 does not have an equivalent for proxy-based checks that create too many false positives, are not worth running because modern browsers don't allow the vulnerability to be exploited, or are no longer considered relevant. DAST version 5 includes checks that proxy-based analyzer does not.

DAST version 5 scans provide better coverage of your application, so they may identify more vulnerabilities because more of your site is scanned.

Coverage

One proxy-based active check is yet to be implemented in the browser-based DAST analyzer. Migration of the remaining active check is proposed in epic 13411. If you prefer to remain on DAST version 4 until the last check is migrated, see Continuing to use the proxy-based analyzer.

Remaining check:

  • CWE-79: Cross-site Scripting (XSS)

On-demand scans

On-demand scans runs a browser-based scan using DAST version 5 from GitLab 17.0.

Troubleshooting

See the DAST version 5 troubleshooting documentation.

Changes to CI/CD variables

The following table outlines migration actions required for each proxy-based analyzer CI/CD variable. See configuration for more information on configuring DAST version 5.

Proxy-based analyzer CI/CD variable Required action Notes
DAST_ADVERTISE_SCAN Rename To DAST_REQUEST_ADVERTISE_SCAN
DAST_ALLOWED_HOSTS Rename To DAST_SCOPE_ALLOW_HOSTS
DAST_API_HOST_OVERRIDE Remove Not supported
DAST_API_SPECIFICATION Remove Not supported
DAST_AUTH_EXCLUDE_URLS Rename To DAST_SCOPE_EXCLUDE_URLS
DAST_AUTO_UPDATE_ADDONS Remove Not supported
DAST_BROWSER_FILE_LOG_PATH Remove No longer required
DAST_DEBUG Remove Not supported
DAST_EXCLUDE_RULES Rename, update check IDs To DAST_CHECKS_TO_EXCLUDE
DAST_EXCLUDE_URLS Rename To DAST_SCOPE_EXCLUDE_URLS
DAST_FILE_LOG_PATH Remove No longer required
DAST_FULL_SCAN_ENABLED Rename To DAST_FULL_SCAN
DAST_HTML_REPORT Remove Not supported
DAST_INCLUDE_ALPHA_VULNERABILITIES Remove Not supported
DAST_MARKDOWN_REPORT Remove Not supported
DAST_MASK_HTTP_HEADERS Remove Not supported
DAST_MAX_URLS_PER_VULNERABILITY Remove Not supported
DAST_ONLY_INCLUDE_RULES Rename, update check IDs To DAST_CHECKS_TO_RUN
DAST_PATHS None Supported
DAST_PATHS_FILE None Supported
DAST_PKCS12_CERTIFICATE_BASE64 None Supported
DAST_PKCS12_PASSWORD None Supported
DAST_SKIP_TARGET_CHECK None Supported
DAST_SPIDER_MINS Change To DAST_CRAWL_TIMEOUT using a duration. For example, instead of 5, use 5m
DAST_SPIDER_START_AT_HOST Remove Not supported
DAST_TARGET_AVAILABILITY_TIMEOUT Change To DAST_TARGET_CHECK_TIMEOUT using a duration. For example, instead of 60, use 60s
DAST_USE_AJAX_SPIDER Remove Not supported
DAST_XML_REPORT Remove Not supported
DAST_WEBSITE Rename To DAST_TARGET_URL
Self-managed: Upgrade your instance to version 17.0 or newer before removing DAST_WEBSITE. This variable is required if you use the DAST.gitlab-ci.yml file included with pre-17.0 versions of GitLab.
DAST_ZAP_CLI_OPTIONS Remove Not supported
DAST_ZAP_LOG_CONFIGURATION Remove Not supported
SECURE_ANALYZERS_PREFIX None Supported